   PRO/100+ Client Adapter Readme File



More information on using the PRO/100+ Client Adapter CD-ROM
============================================================


How to create a floppy installation disk from this CD-ROM
=========================================================
If you don't have a CD-ROM drive on the target workstation, you 
can still install and configure the PRO/100+ Client adapter 
software. 

To create the PRO/100+ Client adapter installation diskette, 
you'll need a blank, formatted, 3.5-inch, high-density diskette.

1. Insert the PRO/100+ Client adapter CD-ROM in the CD-ROM drive 
   of a system where you can run DOS. 

2. From DOS, go to the root directory on your CD-ROM drive.

   Besides README.BAT, there are three .BAT files in this
   directory:
   
   MAKEMS.BAT  -- Creates an adapter installation diskette for
                  Microsoft* Windows* operating systems

   MAKENW.BAT  -- Creates an adapter installation diskette for
                  NetWare* operating systems

   MAKEW98.BAT -- Creates an adapter installation diskette for 
                  the Windows 98 operating system using a
                  digitally-signed set of driver files

3. Run the .BAT file that is appropriate for your operating system
   and follow the instructions on the screen. 

   You will be prompted to label and insert the blank diskette.

4. Use your newly created diskette to install and configure the 
   PRO/100+ Client adapter software. Insert the diskette and run
   SETUP.EXE. Follow the instructions on the screen.



*Third-party trademarks are the property of their respective owners.
